The Entanglement of Li Capping and Deposition: An Operando Optical Microscopy Study.

Dendrite growth and low Coulombic efficiency impede the practical application of Li-metal batteries. As such, monitoring Li deposition and stripping in real-time is crucial to understanding the fundamental lithium growth kinetics. This work presents an operando optical microscopic technique that enables precise current density control and quantification of Li layer properties (i.e., thickness and porosity) to study Li growth in various electrolytes. We discover the robustness and porosity of the remaining capping layer after the Li stripping process as the critical features governing the subsequent dendrite propagation behavior, resulting in distinct capping and stacking phenomena that affect Li growth upon cycling. While dendrite propagation quickly occurs through the fracture of the fragile Li capping layer, uniform Li plating/stripping can be facilitated by the compact and robust capping layer even at high current densities. This technique can be extended to evaluate dendrite suppression treatments in various metal batteries, providing in-depth information on metal growth mechanisms.

A Nonflammable High-Voltage 4.7 V Anode-Free Lithium Battery.

Anode-free lithium-metal batteries employ in situ lithium-plated current collectors as negative electrodes to afford optimal mass and volumetric energy densities. The main challenges to such batteries include their poor cycling stability and the safety issues of the flammable organic electrolytes. Here, a high-voltage 4.7 V anode-free lithium-metal battery is reported, which uses a Cu foil coated with a layer (≈950 nm) of silicon-polyacrylonitrile (Si-PAN, 25.5 µg cm-2 ) as the negative electrode, a high-voltage cobalt-free LiNi0.5 Mn1.5 O4 (LNMO) as the positive electrode and a safe, nonflammable ionic liquid electrolyte composed of 4.5 m lithium bis(fluorosulfonyl)imide (LiFSI) salt in N-methyl-N-propyl pyrrolidiniumbis(fluorosulfonyl)imide (Py13 FSI) with 1 wt% lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as additive. The Si-PAN coating is found to seed the growth of lithium during charging, and reversibly expand/shrink during lithium plating/stripping over battery cycling. The wide-voltage-window electrolyte containing a high concentration of FSI- and TFSI- facilitates the formation of stable solid-electrolyte interphase, affording a 4.7 V anode-free Cu@Si-PAN/LiNi0.5 Mn1.5 O4 battery with a reversible specific capacity of ≈120 mAh g-1 and high cycling stability (80% capacity retention after 120 cycles). These results represent the first anode-free Li battery with a high 4.7 V discharge voltage and high safety.

Highly Concentrated Salt Electrolyte for a Highly Stable Aqueous Dual-Ion Zinc Battery.

A zinc metal anode for zinc-ion batteries is a promising alternative to solve safety and cost issues in lithium-ion batteries. The Zn metal is characterized by its high theoretical capacity (820 mAh g-1), low redox potential (0.762 V vs SHE), low toxicity, high abundance on Earth, and high stability in water. Taking advantage of the stability of Zn in water, an aqueous Zn ion battery with low cost, high safety, and easy-to-handle features can be developed. To minimize water-related parasitic reactions, this work utilizes a highly concentrated salt electrolyte (HCE) with dual salts─1 m Zn(OTf)2 + 20 m LiTFSI. MD simulations prove that Zn2+ is preferentially coordinated with O in the TFSI- anion from HCE instead of O in H2O. HCE has a broadened electrochemical stability window due to suppressed H2 and O2 evolution. Some advanced ex situ and in situ/in operando analysis techniques have been applied to evaluate the morphological structure and the composition of the in situ formed passivation layer. A dual-ion full Zn||LiMn2O4 cell employing HCE has an excellent capacity retention of 92% after 300 cycles with an average Coulombic efficiency of 99.62%. Meanwhile, the low concentration electrolyte (LCE) cell degrades rapidly and is short-circuited after 66 cycles with an average Coulombic efficiency of 96.91%. The battery's excellent cycling performance with HCE is attributed to the formation of a stable anion-derived solid-electrolyte interphase (SEI) layer. On the contrary, the high free water activity in LCE leads to a water-derived interfacial layer with unavoidable dendrite growth during cycling.

Lithium Oxalate as a Lifespan Extender for Anode-Free Lithium Metal Batteries.

Anode-free lithium metal batteries (AFLMBs) have been extensively studied due to their intrinsic high energy and safety without a metallic Li anode in cell design. Yet, the dendrite and dead-Li buildup continuously consumes the active Li upon cycling, leading to the poor lifespan of AFLMBs. Here, we introduce lithium oxalate into the cathode as an electrode additive providing a Li reservoir to extend the lifespan of AFLMBs. The AFLMB using 20% lithium oxalate and a LiNi0.3Co0.3Mn0.3O2 composite cathode exhibits >80 and 40% capacity retention after 50 and 100 cycles, respectively, outperforming the poor cycle life of fewer than 20 cycles obtained from the cell using a pure LiNi0.3Co0.3Mn0.3O2 cathode. Surprisingly, the average Coulombic efficiency of AFLMBs is found to improve as the amount of lithium oxalate increases in the composite cathode. This abnormal phenomenon could be attributed to the as-formed carbon dioxide after the first activation cycle forming a Li2CO3-rich solid-electrolyte interphase and improving the Li deposition and stripping efficiency. The findings in this work provide a new strategy to delay the capacity roll-over of AFLMBs from an electrode engineering perspective, which can be coupled with other approaches such as functional electrolytes synergistically to further improve the cycle life of AFLMBs for practical application.

A Powerful Protocol Based on Anode-Free Cells Combined with Various Analytical Techniques.

Lithium (Li) metal is the ultimate negative electrode due to its high theoretical specific capacity and low negative electrochemical potential. However, the handling of lithium metal imposes safety concerns in transportation and production due to its reactive nature. Recently, anode-free lithium metal batteries (AFLMBs) have drawn much attention because of several of their advantages, including higher energy density, lower cost, and fewer safety concerns during cell production compared to LMBs. Pushing the reversible Coulombic efficiency (CE) of AFLMBs up to 99.98% is key to achieving their 80% capacity retention over more than 1000 cycles. However, interfacial irreversible phenomena such as electrolyte decomposition reactions on both electrodes, dead Li formation, and Li dendrite formation result in poor capacity retention and short circuits in LMBs and AFLMBs. Therefore, it is of great importance and scientific interest to explore those interfacial irreversible phenomena to improve the cell's cycle life. Although significant contributions toward mitigating electrolyte decomposition, dead lithium, and dendritic lithium formation have been reported at the lithium anode, real irreversible phenomena are usually hidden or difficult to discover due to excess lithium employed in LMBs and simultaneous events taking place in both electrodes or at the interfaces.An integrated protocol is suggested to include Li||Cu, cathode||Li, and cathode||Cu configurations to provide overall quantification and determination of various sources of irreversible Coulombic efficiency (irr-CE) in AFLMBs and LMBs. Combining Li||Cu, cathode||Li, and cathode||Cu configurations is essential for separating the root sources of the capacity loss and irr-CE in LMBs and AFLMBs. Remarkably, integrating an anode-free cell with various analytical techniques can serve as a powerful protocol to decouple and quantify those interfacial irreversible phenomena according to our recent reports.In this Account, we focus on the protocol based on an anode-free cell combined with various analytical methods to investigate interfacial irreversible phenomena. Complementary advanced tools such as transmission X-ray microscopy (visualizing Li plating/stripping mechanism), nuclear magnetic resonance spectroscopy (quantifying dead lithium), and gas chromatography-mass spectroscopy (decoupling interfacial reactions) were employed to extract the intrinsic reasons and sources of individual irreversible reactions in LMBs and AFLMBs. Quantitative evaluation of nucleation and growth of Li metal deposition are addressed, along with solid electrolyte interphase (SEI) fracture, visualization of lithium dendrite growth, decoupling of oxidative and reductive electrolyte decomposition mechanisms, and irreversible efficiency (i.e., dead Li and SEI formation) to reveal the intrinsic causes of individual irr-CE in AFLMBs. Meanwhile, an anode-free protocol can also be utilized as a powerful and multifunctional tool to develop electrolyte formulations or artificial layers for LMBs and AFLMBs. Therefore, we also suggest that the anode-free configurations with significant irreversible phenomena can effectively screen and develop new electrolytes. Finally, the concepts of the protocol with an anode-free cell combined with various advanced analytical tools can be extended to provide an in-depth understanding of other metal batteries and solid-state anode-free metal batteries.

Decoupling the origins of irreversible coulombic efficiency in anode-free lithium metal batteries.

Anode-free lithium metal batteries are the most promising candidate to outperform lithium metal batteries due to higher energy density and reduced safety hazards with the absence of metallic lithium anode during initial cell fabrication. In general, researchers report capacity retention, reversible capacity, or rate capability of the cells to study the electrochemical performance of anode-free lithium metal batteries. However, evaluating the behavior of batteries from limited aspects may easily overlook other information hidden deep inside the meretricious results or even lead to misguided data interpretation. In this work, we present an integrated protocol combining different types of cell configuration to determine various sources of irreversible coulombic efficiency in anode-free lithium metal cells. The decrypted information from the protocol provides an insightful understanding of the behaviors of LMBs and AFLMBs, which promotes their development for practical applications.

New Insights into the N-S Bond Formation of a Sulfurized-Polyacrylonitrile Cathode Material for Lithium-Sulfur Batteries.

Sulfurized polyacrylonitrile (S-cPAN) has been recognized as a particularly promising cathode material for lithium-sulfur (Li-S) batteries due to its ultra-stable cycling performance and high degree of sulfur utilization. Though the synthetic conditions and routes for modification of S-cPAN have been extensively studied, details of the molecular structure of S-cPAN remain yet unclear. Herein, a more reasonable molecular structure consisting of pyridinic/pyrrolic nitrogen (NPD/NPL) is proposed, based on the analysis of combined X-ray photoelectron spectroscopy, 13C/15N solid-state nuclear magnetic resonance, and density functional theory data. The coexistence of vicinal NPD/NPL entities plays a vital role in attracting S2 molecules and facilitating N-S bond formation apart from the generally accepted C-S bond in S-cPAN, which could explain the extraordinary electrochemical features of S-cPAN among various nitrogen-containing sulfurized polymers. This study provides new insights and a better understanding of structural details and relevant bond formation mechanisms in S-cPAN, providing a foundation for the design of new types of sulfurized cathode materials suitable for application in next-generation high-performance Li-S batteries.

Dual-Doped Cubic Garnet Solid Electrolytes with Superior Air Stability.

Li7La3Zr2O12 (LLZO) garnet is one kind of solid electrolyte drawing extensive attention due to its good ionic conductivity, safety, and stability toward lithium metal anodes. However, the stability problem during synthesis and storage results in high interfacial resistance and prevents it from practical applications. We synthesized air-stable dual-doped Li6.05La3Ga0.3Zr1.95Nb0.05O12 ((Ga, Nb)-LLZO) cubic-phase garnets with ionic conductivity of 9.28 × 10-3 S cm-1. The impurity-phase species formation on the garnet pellets after air exposure was investigated. LiOH and Li2CO3 can be observed on the garnet pellets by Raman spectroscopy, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) once the garnets are exposed to humid air or come in contact with water. The (Ga, Nb)-LLZO garnet is found to form less LiOH and Li2CO3, which can be further reduced or removed after drying treatment. To confirm the stability of the garnet, an electrochemical test of the Li//Li symmetric cell was also performed in comparison with previously reported garnets (Li7La2.75Ca0.25Zr1.75Nb0.25O12, (Ca, Nb)-LLZO). The dual-doped (Ga, Nb)-LLZO showed less polarized and stable plating/stripping behavior than (Ca, Nb)-LLZO. Through Rietveld refinement of XRD patterns of prepared materials, dopant Ga was found to preferably occupy the Li site and Nb takes the Zr site, while dopant Ca mainly substituted La in the reference sample. The inherited properties of the dopants in (Ga, Nb)-LLZO and their structural synergy explain the greatly improved air stability and reduced interfacial resistance. This may open a new direction to realize garnet-based solid electrolytes with lower interfacial resistance and superior air stability.

Nucleation and Growth Mechanism of Lithium Metal Electroplating.

Understanding the mechanism of Li nucleation and growth is essential for providing long cycle life and safe lithium ion batteries or lithium metal batteries. However, no quantitative report on Li metal deposition is available, to the best of our knowledge. We propose a model for quantitatively understanding the Li nucleation and growth mechanism associated with the solid-electrolyte interphase (SEI) formation, which we name the Li-SEI model. The current transients at various overpotentials initiate the nucleation and growth of Li metal on bare Cu foil. The Li-SEI model considering a three-dimensional diffusion-controlled instantaneous process (J3D-DC) with the simultaneous reduction of electrolyte decomposition (JSEI) due to the SEI fracture is employed for investigating the Li nucleation and growth mechanism. The individual contributions of experimental and theoretical transient states, i.e., the fundamental kinetic values of diffusion coefficient (D), rate of nucleation (N0), and rate constant of electrolyte decomposition (kSEI), can be determined from the Li-SEI model. Interestingly, JSEI increases with time, indicating that the current contributing from the electrolyte decomposition increases with time due to the SEI fracture upon Li deposition. Meanwhile, the kSEI increases with overpotential, indicating the SEI fracture is more serious at higher overpotential or higher growth rate. The kSEI is smaller in the electrolyte with fluoroethylene carbonate (FEC) additive, indicating that FEC additive can significantly suppress the SEI fracture during Li metal deposition. This proposed model opens a new way to quantitatively understand the Li nucleation and growth mechanism and electrolyte decomposition on various substrates or in different electrolytes.

Effects of Concentrated Salt and Resting Protocol on Solid Electrolyte Interface Formation for Improved Cycle Stability of Anode-Free Lithium Metal Batteries.

The combined effect of concentrated electrolyte and cycling protocol on the cyclic performance of the anode-free battery (AFB) is evaluated systematically. In situ deposition of Li in the AFB configuration in the presence of a concentrated electrolyte containing fluorine-donating salt and resting the deposit enables the formation of stable and uniform SEI. The SEI intercepts the undesirable side reaction between the deposit and solvent in the electrolyte and reduces electrolyte and Li consumption during cycling. The synergy between the laboratory-prepared concentrated 3 M LiFSI in the ester-based electrolyte and our resting protocol significantly enhanced cyclic performances of AFBs in comparison to the commercial carbonate-based dilute electrolyte, 1 M LiPF6. Benefitting from the combined effect, Cu∥LiFePO4 cells delivered excellent cyclic performance at 0.5 mA/cm2 with an average CE of up to 98.78%, retaining a reasonable discharge capacity after 100 cycles. Furthermore, the AFB can also be cycled at a high rate up to 1.0 mA/cm2 with a high average CE and retaining the encouraging discharge capacity after 100 cycles. The fast cycling and stable performance of these cells are attributed to the formation of robust, flexible, and tough F-rich conductive SEI on the surface of the in situ-deposited Li by benefiting from the combined effect of the resting protocol and the concentrated electrolyte. A condescending understanding of the mechanism of SEI formation and material choice could facilitate the development of AFBs as future advanced energy storage devices.

Immobilized Single Molecular Molybdenum Disulfide on Carbonized Polyacrylonitrile for Hydrogen Evolution Reaction.

Designing a MoS2 catalyst having a large number of active sites and high site activity enables the catalytic activity toward the hydrogen evolution reaction to be improved. Herein, we report the synthesis of a low-cost and catalytically active immobilized single molecular molybdenum disulfide on carbonized polyacrylonitrile (MoS2-cPAN) electrocatalyst. From the extended X-ray absorption fine structure spectra analysis, we found that the as-prepared material has no metal-metal scattering and it resembles MoS2 with a molecular state. Meanwhile, the size of the molecular MoS2 has been estimated to be about 1.31 nm by high-angle annular dark-field scanning transmission electron microscopy. A low coordination number and maximum utilization of the single molecular MoS2 surface enable MoS2-cPAN to demonstrate electrochemical performance significantly better than that of bulk MoS2 by two orders of exchange current density ( jo) and turnover frequency to the hydrogen evolution.

Locally Concentrated LiPF6 in a Carbonate-Based Electrolyte with Fluoroethylene Carbonate as a Diluent for Anode-Free Lithium Metal Batteries.

Currently, concentrated electrolyte solutions are attracting special attention because of their unique characteristics such as unusually improved oxidative stability on both the cathode and anode sides, the absence of free solvent, the presence of more anion content, and the improved availability of Li+ ions. Most of the concentrated electrolytes reported are lithium bis(fluorosulfonyl)imide (LiFSI) salt with ether-based solvents because of the high solubility of salts in ether-based solvents. However, their poor anti-oxidation capability hindered their application especially with high potential cathode materials (>4.0 V). In addition, the salt is very costly, so it is not feasible from the cost analysis point of view. Therefore, here we report a locally concentrated electrolyte, 2 M LiPF6, in ethylene carbonate/diethyl carbonate (1:1 v/v ratio) diluted with fluoroethylene carbonate (FEC), which is stable within a wide potential range (2.5-4.5 V). It shows significant improvement in cycling stability of lithium with an average Coulombic efficiency (ACE) of ∼98% and small voltage hysteresis (∼30 mV) with a current density of 0.2 mA/cm2 for over 1066 h in Li||Cu cells. Furthermore, we ascertained the compatibility of the electrolyte for anode-free Li-metal batteries (AFLMBs) using Cu||LiNi1/3Mn1/3Co1/3O2 (NMC, ∼2 mA h/cm2) with a current density of 0.2 mA/cm2. It shows stable cyclic performance with ACE of 97.8 and 40% retention capacity at the 50th cycle, which is the best result reported for carbonate-based solvents with AFLMBs. However, the commercial carbonate-based electrolyte has <90% ACE and even cannot proceed more than 15 cycles with retention capacity >40%. The enhanced cycle life and well retained in capacity of the locally concentrated electrolyte is mainly because of the synergetic effect of FEC as the diluent to increase the ionic conductivity and form stable anion-derived solid electrolyte interphase. The locally concentrated electrolyte also shows high robustness to the effect of upper limit cutoff voltage.

Rechargeable aluminum batteries: effects of cations in ionic liquid electrolytes.

Room temperature ionic liquids (RTILs) are solvent-free liquids comprised of densely packed cations and anions. The low vapor pressure and low flammability make ILs interesting for electrolytes in batteries. In this work, a new class of ionic liquids were formed for rechargeable aluminum/graphite battery electrolytes by mixing 1-methyl-1-propylpyrrolidinium chloride (Py13Cl) with various ratios of aluminum chloride (AlCl3) (AlCl3/Py13Cl molar ratio = 1.4 to 1.7). Fundamental properties of the ionic liquids, including density, viscosity, conductivity, anion concentrations and electrolyte ion percent were investigated and compared with the previously investigated 1-ethyl-3-methylimidazolium chloride (EMIC-AlCl3) ionic liquids. The results showed that the Py13Cl-AlCl3 ionic liquid exhibited lower density, higher viscosity and lower conductivity than its EMIC-AlCl3 counterpart. We devised a Raman scattering spectroscopy method probing ILs over a Si substrate, and by using the Si Raman scattering peak for normalization, we quantified speciation including AlCl4 -, Al2Cl7 -, and larger AlCl3 related species with the general formula (AlCl3) n in different IL electrolytes. We found that larger (AlCl3) n species existed only in the Py13Cl-AlCl3 system. We propose that the larger cationic size of Py13+ (142 Å3) versus EMI+ (118 Å3) dictated the differences in the chemical and physical properties of the two ionic liquids. Both ionic liquids were used as electrolytes for aluminum-graphite batteries, with the performances of batteries compared. The chloroaluminate anion-graphite charging capacity and cycling stability of the two batteries were similar. The Py13Cl-AlCl3 based battery showed a slightly larger overpotential than EMIC-AlCl3, leading to lower energy efficiency resulting from higher viscosity and lower conductivity. The results here provide fundamental insights into ionic liquid electrolyte design for optimal battery performance.

An operando X-ray diffraction study of chloroaluminate anion-graphite intercalation in aluminum batteries.

We investigated rechargeable aluminum (Al) batteries composed of an Al negative electrode, a graphite positive electrode, and an ionic liquid (IL) electrolyte at temperatures down to -40 °C. The reversible battery discharge capacity at low temperatures could be superior to that at room temperature. In situ/operando electrochemical and synchrotron X-ray diffraction experiments combined with theoretical modeling revealed stable AlCl4-/graphite intercalation up to stage 3 at low temperatures, whereas intercalation was reversible up to stage 4 at room temperature (RT). The higher-degree anion/graphite intercalation at low temperatures affords rechargeable Al battery with higher discharge voltage (up to 2.5 V, a record for Al battery) and energy density. A remarkable cycle life of >20,000 cycles at a rate of 6C (10 minutes charge time) was achievable for Al battery operating at low temperatures, corresponding to a >50-year battery life if charged/discharged once daily.